After 24 hours of fighting, the store has been rebuilt! We're back stronger and better prepared for attacks!
If your pad automatically moves to one side, which can be observed in games or the console's main menu, or worse, does not work in a certain direction, you should replace the analog module
Replacement analog from Infinity Gaming. If your pad automatically moves to one side - which can be observed in games or the console's main menu, or worse, does not work in a certain direction, you should replace the module.
Product features:
We recommend installation:
In the case of SONY Dualshock 4 and Dualsense controllers, it is not possible to select the analog by model or housing. Analogs are selected visually (you need to disassemble the pad)! The choice is usually limited to V4 - orange with 10k potentiometers, V7 - green-blue with 10k potentiometer.
Differences in analogs:
NOTE! The analog may lock in extreme positions and this is normal. After soldering and assembling the housing, it will never lock. The analog consists of 2 potentiometers with a resistance of 10kOhm (2,3K in the case of Dualsense) and a tolerance of 20%.
After replacement, the analog turns to one side by itself. How to solve the problem?
As I mentioned above, the analog is 2 potentiometers (colored element with 3 legs, can be disconnected from the housing) with a total resistance of 10kOhm and a tolerance of 20%. This means that in practice they have 9-11kOhm. Both potentiometers act as voltage dividers. If there is a deviation after replacement, it means that an analog with different parameters was installed. The ideal solution would be to recalibrate the pad, just as new analogs are calibrated in Nintendo Switch JoyCons. Therefore, the simplest solution is to solder the potentiometers (those with 3 legs) until it works, or measure the old potentiometer and select one as close as possible. All analogs are sent randomly, we do not measure the potentiometers before shipping!
Measuring the potentiometer on the 2 outer pins is a very big simplification and is intended to show that each analog is different (20% tolerance). For correct calculation of the center, the proportion between legs 1 and 2 and 1 and 3 is more important, because the voltage on the potentiometer is directly proportional to the resistance (principle of operation of the voltage divider). If someone does not understand the principle of the voltage divider, they should not attempt to replace analogs.
What to do if the analog is skewed:
1. replace the potentiometers until it works
2. use drift-fix
3. perform pad calibration (if possible)
To better understand the issues, I recommend reading articles on Wikipedia (https://pl.wikipedia.org/wiki/Potencjometr) about potentiometers and the voltage divider.
We ship products to most European countries and several around the world. If your destination is not on the list, please contact us.
1. New - brand new, mostly used for the first assembly, such as integraded chips, data sockets or analogue sticks. Covered by a 24-month warranty (6 months for batteries).
2. Used - the smallest group in our assortment. Fully functional, but we cannot determine their condition. Mostly items that do not breaks down. These group include power supplies for consoles (e.g. 3DS or Xbox 360) or memory cards. Covered by a 6-month warranty.
3. Refurbished renewed, from disassembly - the largest group of products - professionally disassembled, tested for proper operation and, if necessary, refurbished and cleaned. They meet the same quality requirements that the manufacturer sets for all new devices. Key components replaced using original parts (e.g. lasers in disc drives, analogue sticks in controllers). Covered by a 12-month warranty (6 months for batteries).
Polski
English GB
English
