Konsolowo.pl – repair parts for consoles PlayStation, Xbox, Nintendo
If your pad works on its own to one side, which we can observe in games or the console's main menu, or worse, it does not work in some direction, you should replace the module
Replacement analog of the brand Infinity Gaming. If your pad works on its own to one side - which we can observe in games or the console's main menu, or worse, it does not work in some direction, you should replace the module.
Product features:
We recommend installation:
In the case of controllers SONY Dualshock 4 and Dualsense there is no possibility to select the analog by model or housing. We choose analogs visually (you need to disassemble the pad)! The choice is usually limited to V4 - orange with 10k potentiometers, V7 - green-blue with 10k potentiometer.
Differences in analogs:
NOTE! The analog may stick in extreme positions and this is normal. After soldering and assembling the housing it will never stick. The analog consists of 2 potentiometers with resistance 10kOhm (2,3K in case of Dualsense) and tolerance 20%.
After replacement the analog turns to one side by itself. How to solve the problem?
As I mentioned above, the analog is 2 potentiometers (colored element with 3 legs, can be disconnected from the housing) with total resistance 10kOhm and tolerance 20%. This means that in practice they have 9-11kOhm. Both potentiometers act as voltage dividers. If after replacement there is a deviation, it means that an analog with different parameters was installed. The ideal solution would be to recalibrate the pad, just like new analogs are calibrated in Nintendo Switch JoyCons. Therefore, the simplest solution is to solder the potentiometers (those with 3 legs) until it works, or measure the old potentiometer and choose as close as possible. All analogs are sent randomly, we do not measure potentiometers before shipping!
Measuring the potentiometer on the extreme 2 pins is a big simplification and is meant to show that each analog is different (tolerance 20%). For correct calculation of the center, the proportion between legs 1 and 2 and 1 and 3 is more important, because the voltage on the potentiometer is directly proportional to the resistance (principle of voltage divider). If someone does not understand the principle of the divider, they should not attempt to replace analogs.
What to do if the analog is skewed:
1. swap potentiometers until it works
2. use drift-fix
3. perform pad calibration (if possible)
To better understand the topic, I recommend reading articles on Wikipedia (https://pl.wikipedia.org/wiki/Potencjometr) about potentiometers and voltage divider.
We ship products to most European countries and several around the world. If your destination is not on the list, please contact us.
1. New - brand new, mostly used for the first assembly, such as integraded chips, data sockets or analogue sticks. Covered by a 24-month warranty (6 months for batteries).
2. Used - the smallest group in our assortment. Fully functional, but we cannot determine their condition. Mostly items that do not breaks down. These group include power supplies for consoles (e.g. 3DS or Xbox 360) or memory cards. Covered by a 6-month warranty.
3. Refurbished renewed, from disassembly - the largest group of products - professionally disassembled, tested for proper operation and, if necessary, refurbished and cleaned. They meet the same quality requirements that the manufacturer sets for all new devices. Key components replaced using original parts (e.g. lasers in disc drives, analogue sticks in controllers). Covered by a 12-month warranty (6 months for batteries).
Polski
English GB
English
