All Category
Tools for Xbox 360.
There are 58 products.
X-Tool have created a special tool for disassembling the Xbox 360 Slim console. As many already know, opening the Xbox 360 Slim is not as easy as opening the Xbox 360 Fat.
The Matrix Glitcher V2, adds full support and compatibility for 250 GB Corona (V1) and 4 GB Corona (V2) consoles.
This unlocked Lite-on DVD Drive is perfect for replacing or upgrading most of your Xbox 360 Drive (mostly installed in Slim consoles produced before 8/2011). The Lite-on drive is the first model used by Microsoft in Xbox 360 Slim. If your console is struggling to read disks, reports errors, or has compatibility or speed problems when playing back up...
Maximus Kamikaze Drill is a simple template to mark the spot for that Kamikaze UNLOCK on Winbond flash for Slim Drives
A case unlock kit for Xbox 360, using the best steel for molding, specially designed for unlocking the Xbox 360 console.
Do you have a faulty Liteon DG-16D5S DVD in your Xbox 360? Are you swapping your drive to another console and are unable to program your firmware due to write protection being ena bled ?
A case unlock kit for Xbox 360 Slim, using the best steel for molding, specially designed for unlocking the Xbox 360 console.
Matrix Freedom PCB is perfect replacement for all LiteOn DG-16D4S mainboards (produced before 31.07) Fits all Liteon DG-16D4S Drives
A T8 Screwdriver designed to open Xbox 360 Controllers. Also compatible with PS3 Slim.
JR Programmer 2 Version with Full POSt Monitoring and CR3 Pro Rater Support. Also includes speed enhancements (2-3 minutes faster than JRP v1 !)
The Maximus Trident MX is a spear / probe device that can be used on the Xbox 360 Slim Lite-On DG-16D4S drives that have the Macronix SPI chips to unlock them, the process does not require any soldering and only 1-track needs to be cut for the process making it very user friendly for those new or old to drive flashing.
A T8 Screwdriver designed to open Xbox 360 Controllers. Also compatible with PS3 Slim.
One of the main problems for RGH2 users (and some RGH1 too), is the quality of the CPU_RST line. Over the last couple of weeks we have seen some great results on our forums with various methods of combining different capacitors and resistors to give a really nice performance boost (some guys went from not glitching at all to 10 seconds !)
Do you have a faulty Liteon DG-16D5S DVD in your Xbox 360 ? Are you swapping your drive to another console and are unable to program your firmware due to write protection being enabled ?
XClamp unlock tool from Team Xecuter, stand alone unit.
X360 SUPER NAND FLASHER is the fastest XBOX360 NAND read and write programmer, using the LPC2148 ARM controller, the micro-processor can four times faster to read and write the XBOX360 NAND than other programmer using PIC2455.We reserve the LPC2148 ARM JTAG interface port, which allow you to upgrade the LPC2148 firmware in the future when upgrade is needed.
A case unlock kit for Xbox 360E, using the best steel for molding, specially designed for unlocking the Xbox 360E console.
Do you have a faulty Hitachi DL10N DVD in your Xbox 360 ? Are you swapping your drive to another console and are unable to program your firmware due to write protection being enabled ?
This is a custom made LPT JTAG Cable that is designed direct from the official Xilinx schematics (not the cheap design that is going around - this is the higher spec design from Xilinx)
Unlocked PCB for all LiteOn DG-16D4S mainboards (produced before 31.07) Fits all Liteon DG-16D4S Drives
Those that have fitted a CoolRunner to will be no stranger to the fact that it can take a great deal of trial and error to get the optimized boot times down to less than 5 seconds.
This is perfect replacement Board for Xbox 360 with slim Hitachi-LG 0500 /0502 Drive.It is custom designed PCB which can Fully compatible with 9504, 0225 and 0401 fw revisions .and you don't need to waste your hitachi drive to replace with slim Liteon drive. just replace the Drive Board.
Easy install to any Corona v3 or Corona v4 motherboard that has the POST OUT removed.
Do you have a faulty Liteon DG-16D5S DVD in your Xbox 360 ? Are you swapping your drive to another console and are unable to program your firmware due to write protection being enabled ?
Easy install to any Corona v3 - v6 motherboard that has the POST OUT removed.
Do you have a faulty Hitachi DL10N DVD in your Xbox 360 ? Are you swapping your drive to another console and are unable to program your firmware due to write protection being enabled ?
Fast RGH 2 glitcher chip. Compatible with Phat, Trinity and Corona Boards. This model has some changes like the new jtag programming port without connector, and a new range of capacitor selections for CPU_RESET and PLL_BYPASS (phat RGH1).
The Scorpion is a board that will allow users to extract the keys from Lite-on 83 v2 & 93 drives without cutting any tracks or having to solder to rebuild the cut tracks.
X360Run Perfectly Glitches your XBOX360 slim- It is perfectly compatible with all XBOX360 Slim machines. Such as Trinity and Corona V1- V4- It used the high performance and high frequency pulse-attack chip.- It has the more precisely pulse-attack boot time in an instant.- It is comprehensive to upgrade and replace the Matrix Glitcher and Xecuter...
The Matrix Glitcher V1, adds full support and compatibility for 250 GB Corona (V1) and 4 GB Corona (V2) consoles.As with the previous version the Matrix Glitcher II is still a complete plug and play solution. No need to program it before use, simply install it and select the correct switch combination for your console.
Locked PCB for all LiteOn DG-16D5S mainboards (produced after 31.07) Fits all Liteon DG-16D5S Drives
The Maximus SDTool for Corona 4GB Kit includes 2 modes of installation that fits the installer's experience. It can be installed with a user friendly Quick-Solder Board for beginners or can be installed with a pin header kit (for experienced installers). The Maximus SDTool for Corona 4GB kit include two separate modules! (*BONUS – one kit for 2 consoles)
A simple kit from Team Xecuter to enable fast read/write of the Corona 4GB NAND.
Team Xecuter has designed this nice little addon for the CoolRunner that enables you to select multiple CAP options for a cleaner PLL_BYPASS signal and improved RGH1 boot times. Simply solder between A (PLL_BYPASS) and GND and select up to 5 different CAP values to achieve your desired glitch performance.
The Squirt BGA 1.3, adds full support and compatibility for all Corona's consoles. New version of Squirt BGA, new PCB and new bitstreams.
A T10 Nextek Torx Screwdriver designed to open Xbox 360 consoles.
Fabrycznie nowy przewód od Team Xecuter "CK3i to NAND-X".
Płyta QSB od Team Xecuter ułatwiająca montaż RGH na płytach głównych Corona z 16MB flashem.